Generated by All in One SEO v4.9.8, this is an llms.txt file, used by LLMs to index the site.

# Gage Architectural Products

Decorative Architectural Metal Surfacing

## Pages

- [Home](https://www.gagecorp.net/) - The Gage Corporation has been a leader in the development, design, and manufacture of specialty decorative metal architectural products since 1988. GageCeilings, GageMetal™, GageCarve™, and GageWoven™ are recognized internationally by the Architecture and Design community. Gage Architectural Products are specified extensively for the hospitality, retail, healthcare, corporate, and educational sectors. Gage decorative metal
- [About Us](https://www.gagecorp.net/home/about-us/) - About Gage Corporation
- [Ceiling Designs - Numeric](https://www.gagecorp.net/ceilings/ceiling-designs/ceiling-designs-numeric/) - Numerical design order of decorative metal ceiling panels.
- [GageMetal Technical Information](https://www.gagecorp.net/gagemetal/gagemetal-technical-data/) - Vertical Surfacing Specification Guidelines - Long Form Metals - Types, GradesSheet Sizes & ThicknessForming Decorated MetalsExtrusion (System E) Installation GuidelinesSystem E Trim BracketsSystem "Z" – Z-Bar Installation GuidelinesCoatingsStorageShearing, Cutting, BurrsBonding & SubstratesFire RatingWearing – Scratch/Dent ResistanceRecycled Content GageMetal Weight per Sheet Cleaning Gage Metal Products and Disinfecting for COVID-19 PDF (68 k) GageMetal Informational PDFs GageMetal Fingerprint Resistant
- [GageWoven Technical Information](https://www.gagecorp.net/gagewoven/woven-technical/) - Technical information for specifying and installing Woven metal panels.
- [GageCarve Technical Information](https://www.gagecorp.net/gagecarve/carve-technical/) - GageCarve is appropriate for interior and exterior wall surfacing, elevator doors, elevator interiors, column covers and other architectural applications. GageCarve Specification Guidelines – Short Form GageCarve is available as sheet goods for either a direct adhesive application or can be panelized to the properly prepared substrate with balancing backer (System E). The Gage Extrusion System
- [GageCarve Standard Finishes](https://www.gagecorp.net/gagecarve/gagecarve-finishes/) - Anodize or powder coat options for GageCarve decorative metal wall panels.
- [GageMetal Colored PVD Designs](https://www.gagecorp.net/gagemetal/metal-designs/gagemetal-pvd/) - Select GageMetal designs are available with a PVD color finish. Colorful, formable stainless steel sheets in 18 or 20 gauge.
- [Ceiling Designs](https://www.gagecorp.net/ceilings/ceiling-designs/) - Snap-in or lay-in decorative aluminum ceiling panels.
- [GageWoven Standard Design Specification Matrix](https://www.gagecorp.net/gagewoven/gagewoven-standard-design-specification-matrix/) - Specification information for GageWoven designs, size, alloy, finish
- [GageMetal Standard Designs](https://www.gagecorp.net/gagemetal/metal-designs/) - Discontinued GageMetal designs are listed here.
- [GageWoven Standard Designs](https://www.gagecorp.net/gagewoven/woven-designs/) - Woven metal mesh panel designs.
- [GM438 Long Grain Satin](https://www.gagecorp.net/gagemetal/metal-designs/gm438/) - GageMetal design GM438 Long Grain Satin stainless steel decorative metal sheet with clear Fingerprint Resistant Coating or colored PVD coating with FRC.
- [GageCarve C1022 Pathways](https://www.gagecorp.net/gagecarve/carve-designs/c1022-pathways/) - Single width ribbed dimensional design. Panels are 0.125" thick.
- [GageMetal Discontinued Designs](https://www.gagecorp.net/gagemetal/metal-designs/gagemetal-discontinued-designs/) - The following designs have been discontinued: GM400 Reeds GM401 Ice Flower GM404 Feathers GM408 Granite GM410 Waves GM411 Engine Stripe GM412 Crossroads GM413 Woven Metal GM414 Hourglass GM415 Bandsaw GM417 Magnum GM429 Organic Waves GM430 Layers GM431 Marco GM432 Manhattan GM433 Tuxedo GM444 Field Grass GM445 Trekking
- [GageCarve C1016D Diamond Cut - Diagonal](https://www.gagecorp.net/gagecarve/carve-designs/c1016d/) - 45° Flattened pyramid shapes comprise this diagonal version of C1016. Panels are available in 48″ x 96″ or 48″ x 120″ sizes and are 0.125″ thick. Available in standard GageCarve finishes. Please note that designs shown are not to scale. C1000 Museum C1001 Miami C1002 Linear C1003 Ribbon C1004 Organic C1005A Rough Cut II C1006
- [GageCarve C1006 Horizon](https://www.gagecorp.net/gagecarve/carve-designs/c1006/) - This ¼” concave design is often referred to as fluted. Panels are available in 48″ x 96″ or 48″ x 120″ sizes and are 0.125″ thick. Available in standard GageCarve finishes. Please note that designs shown are not to scale. C1000 Museum C1001 Miami C1002 Linear C1003 Ribbon C1004 Organic C1005A Rough Cut II C1006
- [GageCarve C1010 Plateau](https://www.gagecorp.net/gagecarve/carve-designs/c1010/) - The look of a chocolate bar sculpted in metal; an attention grabbing dimensional pattern. Panels are available in 48″ x 96″ or 48″ x 120″ sizes and are 0.125″ thick. Available in standard GageCarve finishes. Please note that designs shown are not to scale. C1000 Museum C1001 Miami C1002 Linear C1003 Ribbon C1004 Organic C1005A
- [GageCarve C1011 Ripple](https://www.gagecorp.net/gagecarve/carve-designs/c1011/) - Undulating bands with alternating elevations. Panels are available in 48″ x 96″ or 48″ x 120″ sizes and are 0.125″ thick. Available in standard GageCarve finishes. Please note that designs shown are not to scale. C1000 Museum C1001 Miami C1002 Linear C1003 Ribbon C1004 Organic C1005A Rough Cut II C1006 Horizon C1008 Pyramid C1010 Plateau
- [GageCarve C1012 Bamboo](https://www.gagecorp.net/gagecarve/carve-designs/c1012-bamboo/) - Larger scale of our Rough Cut design with random lifts for dimensionality and texture.
- [GageCarve C1013 Waves](https://www.gagecorp.net/gagecarve/carve-designs/c1013/) - Repeated wide, concave flutes are carved into these dimensional metal panels. This design is a wider version of C1006 Horizon. Panels are 0.125" thick.
- [GageCarve C1014 Origami](https://www.gagecorp.net/gagecarve/carve-designs/c1014-origami/) - The geometric look of folded paper recreated in a decorative metal panel. These dimensional sheets are 0.160" thick.
- [GageCarve C1015 Reflections](https://www.gagecorp.net/gagecarve/carve-designs/c1015-reflections/) - Repeated smooth curves are the feature of this design.
- [GageCarve C1016 Diamond Cut](https://www.gagecorp.net/gagecarve/carve-designs/c1016-diamondcut/) - Flattened pyramid shapes comprise this smaller GageCarve design.
- [GageCarve C1019 Encircle](https://www.gagecorp.net/gagecarve/carve-designs/c1019-encircle/) - Interlocking circles create this Carve design. Panels are 0.125" thick.
- [GageCarve C1021 V-Groove](https://www.gagecorp.net/gagecarve/carve-designs/c1021-v-groove/) - Straight flutes give this design the V-Groove name. Metal sheets are 0.125" thick.
- [GageCarve C1004 Organic](https://www.gagecorp.net/gagecarve/carve-designs/c1004-organic/) - A more robust version of C1001 Miami created in random, organic waves.
- [GageCarve C1003 Ribbon](https://www.gagecorp.net/gagecarve/carve-designs/c1003/) - Undulating and alternating ¼” bands create visual depth and movement. Panels are available in 48″ x 96″ or 48″ x 120″ sizes and are 0.125″ thick. Available in standard GageCarve finishes. Please note that designs shown are not to scale. C1000 Museum C1001 Miami C1002 Linear C1003 Ribbon C1004 Organic C1005A Rough Cut II C1006
- [GageCarve C1002 Linear](https://www.gagecorp.net/gagecarve/carve-designs/c1002/) - Two line widths and angled sides provide a creative twist to the traditional linear pattern. Panels are available in 48″ x 96″ or 48″ x 120″ sizes and are 0.125″ thick. Available in standard GageCarve finishes. Please note that designs shown are not to scale. C1000 Museum C1001 Miami C1002 Linear C1003 Ribbon C1004 Organic
- [GageCarve C1001 Miami](https://www.gagecorp.net/gagecarve/carve-designs/c1001/) - A random organic pattern. Panels are available in 48″ x 96″ or 48″ x 120″ sizes and are 0.160″ thick. Available in standard GageCarve finishes. Please note that designs shown are not to scale. C1000 Museum C1001 Miami C1002 Linear C1003 Ribbon C1004 Organic C1005A Rough Cut II C1006 Horizon C1008 Pyramid C1010 Plateau C1011
- [GageCarve C1000 Museum](https://www.gagecorp.net/gagecarve/carve-designs/c1000/) - The father of the GageCarve program. This design was originally created by a noted French architect for extensive use in the Qatar Islamic Museum. Panels are available in 48″ x 96″ or 48″ x 120″ sizes and are 0.125″ thick. Available in standard GageCarve finishes. Please note that designs shown are not to scale. C1000
- [GageCarve C1008 Pyramid](https://www.gagecorp.net/gagecarve/carve-designs/c1008/) - A rectangular pyramid with flattened top. Panels are available in 48″ x 96″ or 48″ x 120″ sizes and are 0.160″ thick. Available in standard GageCarve finishes. Please note that designs shown are not to scale. C1000 Museum C1001 Miami C1002 Linear C1003 Ribbon C1004 Organic C1005A Rough Cut II C1006 Horizon C1008 Pyramid C1010
- [GageCarve C1005A Rough Cut II](https://www.gagecorp.net/gagecarve/carve-designs/c1005a/) - Single width stripes that randomly lift creating additional dimensionality. Panels are available in 48″ x 96″ or 48″ x 120″ sizes and are 0.125″ thick. Available in standard GageCarve finishes. Please note that designs shown are not to scale. C1000 Museum C1001 Miami C1002 Linear C1003 Ribbon C1004 Organic C1005A Rough Cut II C1006 Horizon
- [GageCarve Standard Designs](https://www.gagecorp.net/gagecarve/carve-designs/) - Listing of all the dimensional 3D GageCarve standard designs.
- [GageMetal](https://www.gagecorp.net/gagemetal/) - Decorative metal wall panels suitable for walls, elevators, and column covers, as well as other architectural fabrication and consumer products.
- [Sheet Sizes & Thickness](https://www.gagecorp.net/gagemetal/gagemetal-technical-data/sheet-sizes/) - Standard dimensions and thicknesses for panels of GageMetal.
- [GageCarve](https://www.gagecorp.net/gagecarve/) - Sculptural metal wall panels appropriate for interior and exterior wall surfacing, feature walls, elevator doors and interiors. Made in USA.
- [Coordinating Warm Bronze Finishes](https://www.gagecorp.net/inspiration/coordinating-bronze/) - Coordinating Gage finishes of GageWoven in Antique Copper, GageCarve in Aged Bronze, Gage 78 earth metal in Antique Bronze, GageMetal in Copper Bronze PVD
- [GageMetal Classic Stainless Steel Designs](https://www.gagecorp.net/gagemetal/metal-designs/classic-stainless/) - Home › GageMetal › GageMetal Standard Designs › GageMetal Classic Stainless Steel Designs Stainless steel with a slight surface texture that doesn’t require a Fingerprint Resistant Coating. GM422S Armor GM4947 Hammered Satin GM4969 Top-Grain GM4965 Stipple
- [Decorative Metal Ceilings](https://www.gagecorp.net/ceilings/) - Decorative metal ceiling tiles.
- [Coordinating Warm Metals](https://www.gagecorp.net/inspiration/coordinating-warm-metals/) - GageCarve C1003 Ribbon in Champagne finish GageMetal GM423 Pallinato in Champagne PVD finish GageCarve C1005A Rough Cut in Sandstone finish GageMetal GM438 Long Grain Satin in Champagne 2 PVD finish GageWoven GW915 Intersection in Antique Brass finish GageCarve C1020 Crossroads in Champagne finish GageMetal GM403 Non-Directional in Champagne 2 PVD finish Gage 78 EM7800 Little
- [GageMetal Clear FRC Designs](https://www.gagecorp.net/gagemetal/metal-designs/frc-designs/) - Home › GageMetal › GageMetal Standard Designs › GageMetal Clear FRC Designs Visually textured stainless steel designs with Fingerprint Resistant Coating (FRC). Our FRC aids in ease of removal of fingerprints and other unwanted adornments by diminishing the ability of marks to adhere to the surface. Liquids can be removed with less effort due to
- [System E Panel Trims](https://www.gagecorp.net/panel-trims/) - Bracket #1 Standard Outside Corner Bracket #2 Standard Main Carrier Bracket #4 Standard J-Mold Bracket #6 Thin Line Main Carrier Bracket #7 Thin Line Inside Corner Bracket #8 Thin Line J-Mold Bracket #9 Bull-Nose Outside Corner Bracket #11 J-Trim (1.035") Specifically for GageWoven products Bracket #12
- [Black Organic – GageMetal GM4724](https://www.gagecorp.net/gagemetal/metal-designs/black-organic/) - Black Organic steel panels with a naturally oxidized patina that are made in Italy.
- [Black Organic in International Market Square](https://www.gagecorp.net/home/about-us/black-organic-in-international-market-square/) - InUnison Design specified Black Organic for the floor to ceiling fireplace in the lobby of International Market Square.
- [System E – Extrusion Installation Guidelines](https://www.gagecorp.net/system-e-extrusion-installation-guidelines/) - Provide a smooth, straight, solid and clean substrate. Correct any defects prior to commencement of installation. Refer to the drawings (approved shop drawings if required) for correct panel location and layout. Pay particular attention to location of field cut panels. Verify treatment for all termination edges, inside and outside corners (if any), and required cutouts
- [Concealed Panel System](https://www.gagecorp.net/gagewoven/woven-technical/system-cps/) - GageWoven can be specified as sheet goods for fabrication by the installing contractor. In the concealed panel system (referred to as CPS), the wire mesh is secured to the backer panel using a concealed attachment method, either using pressure sensitive adhesive, wire or other attachment techniques. Not all of our standard patterns are suitable for
- [GM401 Ice Flower](https://www.gagecorp.net/gagemetal/metal-designs/gagemetal-artisan-designs/gm401-ice-flower/) - Handcrafted decorative architectural metal wall panel.
- [700 Series Perforated Ceilings](https://www.gagecorp.net/ceilings/700-series/) - Decorative perforated metal ceilings.
- [GageMetal Textured Designs](https://www.gagecorp.net/gagemetal/gagemetal-textured-designs/) - Subtle textured designs in stainless steel.
- [GM423 Pallinato](https://www.gagecorp.net/gagemetal/metal-designs/gm423-pallinato/) - Pallinato bead blast textured stainless steel decorative architectural metal wall panel.
- [Coordinating Silver Finishes](https://www.gagecorp.net/inspiration/coordinating-silver-finishes/) - GageWoven GW923 Cinema Stainless Steel GageCarve C1005A Rough Cut II Nickel finish GageWoven GW917 Organic Weave Stainless Steel GageCarve C1001 Miami Nickel finish GageMetal GM403 Non-Directional with FRC GageCarve C1000 Museum Nickel finish GageWoven GW912A Blue Collar Stainless Steel
- [GageCast Interior Wall Panel Cleaning Instructions](https://www.gagecorp.net/gagecast-interior-wall-panel-cleaning-instructions/) - To remove heavy soil or debris use a vacuum with a soft brush, compressed air nozzle or soap and water with a soft brush are recommended. If soap and water are used dry quickly after cleaning, do not soak in water. For dust, a soft dust rag or a feather type duster will work. General
- [GM403 Non-Directional](https://www.gagecorp.net/gagemetal/metal-designs/gm403/) - Non-directional design decorative architectural metal wall panel.
- [GM437 #4 Brushed](https://www.gagecorp.net/gagemetal/metal-designs/gm437/) - No Color with FRC Fingerprint Resistant Coating aids in ease of cleaningHydrophobic to help repel liquids Graphite Effect Suitable for interior and exterior useFormable to 90º angle
- [GageWoven](https://www.gagecorp.net/gagewoven/) - Woven metal mesh panels manufactured in the Midwest United States of stainless steel, commercial bronze, copper or brass suitable for architectural fabrication and consumer products.
- [Air-Handling Panels](https://www.gagecorp.net/ceilings/gage-ceilings-technical-data/air-handling-panels/) - GageCeilings panels can be converted for air handling purposes.
- [Gage Ceilings Technical Information](https://www.gagecorp.net/ceilings/gage-ceilings-technical-data/) - Specification Guidelines – Ceilings D3 – Short Form Specification Guidelines – Ceilings D1 & M1 – Short Form Specification Guidelines – Ceilings – CSI Format Profile System D1 & M1 Profile System D3 Concealed Snap-In Lay-In Ceilings Ceiling Profiles Acoustical Options Perimeter Details Maritime Certifications Recycled Content Cleaning Gage Metal Products and Disinfecting for COVID-19
- [Universal Spine System](https://www.gagecorp.net/gagewoven/woven-technical/system-uss/) - System USS – Precision metal cutting and welding techniques are used to create a unique woven mesh framing system suitable for in-fill panels, wall panels (flush mount or with stand offs) and room dividers. The wire mesh is welded to the center spine then enclosed by two outer covers. Due to the heft of the
- [GageWoven In-Fill Designs](https://www.gagecorp.net/gagewoven/gagewoven-in-fill-designs/) - Precision metal cutting and welding techniques are used to create a unique woven mesh framing system suitable for infill panels, flush mount or with stand offs wall panels and room dividers. In-Fill Specification Matrix All In-Fill Designs are available in Antique Brass (BA) or Antique Copper (CA) finishes. Click here for more information on
- [Perimeter Details](https://www.gagecorp.net/ceilings/gage-ceilings-technical-data/perimeter-details/) - Clean ceiling perimeters, with both GAGE snap-in and lay-in coffered ceiling profiles, or lay-in tegular profiles, can be quickly accomplished by the installing contractor by ordering flat profiles of the same design and field-cutting them to a gap-free tolerance along the ceiling perimeter. For straight perimeters, field-cut panels are held secure and flat by the
- [New Ceiling Perforations](https://www.gagecorp.net/ceilings/700-series/new-ceiling-perforations/) - Two new ceiling perforation patterns using random sizes of square and rectangles or random sizes of circles.
- [System "Z" – Z-Bar Installation](https://www.gagecorp.net/cast-technical/system-z-z-bar-installation/) - Provide a smooth, straight, solid and clean substrate. Correct any defects prior to commencement of installation. Verify stud spacing to determine if a plywood substrate is required for proper installation of “Z”-bars. Refer to the drawings (approved shop drawings if required) for correct panel location and layout. Verify treatment for all termination edges, inside and
- [Coordinating Champagne Finishes](https://www.gagecorp.net/inspiration/champagne-finishes/) - Collage of coordinating champagne, antique brass, matte black and dark nickel finishes.
- [GageTeam](https://www.gagecorp.net/home/about-us/gageteam/) - Kathy Product Manager GageWoven and Gage Ceilings Christine Product Manager GageCarve Kären Director of Design Linda Sample Manager Sonya Director of Marketing
- [Texas State University Theater](https://www.gagecorp.net/texas-state-university-theater/) - GageCarve C1004 Organic in Aged Bronze finish Custom water jet cutting to remove of selective parts of the panels. Patti Strickel Harrison Theatre at the Texas State University Performing Arts Center in Houston, Texas Specified by Morris Architects Millwork by MCG, Inc. Photography by Joe Acker
- [Concourse Office Park Remodel](https://www.gagecorp.net/home/about-us/concourse-office-park-remodel/) - Remodel of the Concourse Office Park using woven metal mesh in the elevator lobby.
- [GW926 Franco](https://www.gagecorp.net/gagewoven/woven-designs/gw926/) - Design GW926 Franco woven metal
- [GageWoven Plated Finishes](https://www.gagecorp.net/gagewoven/woven-technical/woven-plating/) - Antique Brass (BA) and Antique Copper (CA) finishes are created by a plating process where Brass or Copper is applied in a thin layer via electrodeposition. A dark oxide layer is then introduced over the Brass or Copper. This is followed by a hand-applied abrasion process that buffs the high points of the mesh to
- [Featured Installation – Lobby and Elevator](https://www.gagecorp.net/home/featured-installations/featured-installation-lobby/) - Elevator and lobby installation of five Gage metal wall surface products
- [Featured Installations](https://www.gagecorp.net/home/featured-installations/)
- [Wearing – Scratch/Dent Resistance](https://www.gagecorp.net/gagemetal/gagemetal-technical-data/scratch-resistance-testing/) - It is a myth that some metals will not be scratched. Any metal can be scratched and dented. The specifier should therefore avoid decorated metals, plain or laminates, for any horizontal application such as desk or bar tops. Wear and vandalism are a fact of life; many modern textures and small incremental design patterns will
- [The Origin of GageCarve](https://www.gagecorp.net/home/about-us/origin-gagecarve/) - History of Gage decorative carved metal panels.
- [Coatings](https://www.gagecorp.net/gagemetal/gagemetal-technical-data/pvd-coatings-tin-coatings/) - Physical Vapor Deposition (PVD) Physical Vapor Deposition (PVD) is the process of combining metal vapor with gases and applying it to steel using a vacuum chamber. The process creates a micro thin, transparent, colored film on the stainless steel which increases the durability without adding to the weight of the panel. The process of creating the PVD
- [Forming Decorated Metals](https://www.gagecorp.net/gagemetal/gagemetal-technical-data/forming-decorated-metals/) - Any design pattern finish will look twice as good when formed. Curved surfaces such as columns, soffits or similar acquire added reflectivity and brilliance. Forming is a cost effective technique; specifiers therefore should consider making use of its multiple possibilities. PLAIN METALS EDGE BENDING Decorated sheet metal alloys in Stainless Steel and Brass can easily
- [Metals – Types, Grades](https://www.gagecorp.net/gagemetal/gagemetal-technical-data/metals/) - STAINLESS STEEL ALLOY 304 The metal of choice for most architectural and any decorative surfaces. Ideal for fabrication. It is highly resistant to corrosion and no protective top coating is required. STAINLESS STEEL ALLOY 316 Is used when particularly strong resistance to corrosion becomes a factor: chemical environments or similar exposures. It does not require
- [Bonding & Substrates](https://www.gagecorp.net/gagemetal/gagemetal-technical-data/bonding-substrates/) - Bonding Generally all plain metal sheets are bonded to various substrates by contact cements, by rigid glues or even double sided adhesive tapes. With the great variety of metal alloys and substrates, specifiers should inquire about the chemical and mechanical suitability of any bonding process in relation to any substrate, metal alloy and intended usage
- [Fire Rating](https://www.gagecorp.net/gagemetal/gagemetal-technical-data/fire-rating/) - GageMetal has a Class A Fire Rating as it is a non-combustible material.
- [Shearing, Cutting, Burrs](https://www.gagecorp.net/gagemetal/gagemetal-technical-data/shearing-cutting-burrs/) - Plain sheet metals such as Stainless Steel, Brass, Bronze and Copper should only be cut with a metal shear. Such a cut will result in a minimal burr on the underside (the unfinished side) of the sheet, while "drawing" the cut on the finished side into very slight rounded edge: the "down-cut" edge. Thin gauge
- [Shanghai Tower GageCarve Installation](https://www.gagecorp.net/home/about-us/carve-shanghaitower/) - Shanghai Tower Features GageCarve In the financial district of Shanghai, a new “vertical city” spirals up 2,073 feet into the sky. It is the Gensler-designed Shanghai Tower, which houses a hotel, offices, a lookout deck, and nine vertical “neighborhoods” of shops, restaurants, and sky gardens. The 121-story building is the tallest building in China and
- [GageCarve C1018 Manhattan](https://www.gagecorp.net/gagecarve/carve-designs/c1018/) - C1000 Museum C1001 Miami C1002 Linear C1003 Ribbon C1004 Organic C1005A Rough Cut II C1006 Horizon C1008 Pyramid C1010 Plateau C1011 Ripple C1012 Bamboo C1013 Waves C1014 Origami C1015 Reflections C1016 Diamond Cut C1016D Diamond Cut – Diagonal C1018 Manhattan C1019 Encircle C1021 V-Groove C1022 Pathways C1018 Manhattan in Bronze Gold finish (4" x 4"
- [Coordinating Brass Finishes](https://www.gagecorp.net/inspiration/coordinating-brass-finishes/) - Gage decorative metal panel designs in brass finishes.
- [Inspiration Boards](https://www.gagecorp.net/inspiration/) - Ideas for coordinating finishes and designs of decorative metal panels.
- [Recycled Content](https://www.gagecorp.net/recycled-content/) - Gage Architectural Products are manufactured utilizing various raw materials which contain varying amounts of recycled material. Listed below are our products with their typical recycled content. Gage Ceilings Total Recycled Content: 34.2% Post Consumer: 6.8% Post Industrial: 27.4% GageWoven® Stainless Steel Total Recycled Content: 93% Post Consumer: 80% Post Industrial: 13% GageCarve® Total Recycled Content:
- [GageWoven General Comments](https://www.gagecorp.net/gagewoven/woven-technical/gagewoven-general-comments/) - Standard lead times are 3-4 weeks for SS/SS panels. Standard lead times are 5-6 weeks for most Copper Based Alloys and Antiqued panels. Contact Gage for product samples and technical assistance. Quotations are typically provided within 48 hours of request. GageWoven has 25 standard designs but we also have the ability to fabricate multiple
- [Environmental Statement](https://www.gagecorp.net/home/about-us/environmental-statement/) - The Gage Corporation International is dedicated to continual environmental improvement. Gage, through its primary manufacturer, initially established a Cooperative Environmental Agreement in 2002 with the Wisconsin Department of Natural Resources; this agreement has been extended through 2012 and is currently undergoing the Green Tier application process. Additionally, our primary manufacturing facility has earned ISO 14001 certification. As a member of the US Green
- [Profile System D3](https://www.gagecorp.net/ceilings/gage-ceilings-technical-data/profile-system-d3/) - Item: GAGE lay-in ceiling panel. Profiles (standard): D3.1 (flush) 1, 2 D3.2 (coffered) 2 Profiles (5/8 in. tegular): D3.3 (flat) 2 D3.4 (coffered) 2 Profiles (1/4 in. tegular): D3.5 (flat) 1 Design: As specified. Perforations: Optional* Finish: Gloss levels from matte (30%) to gloss (100%) ±5%. Size: 24 in. x 24 in. (nominal). Metal: .030 in.
- [GW927 Akiko II](https://www.gagecorp.net/gagewoven/woven-designs/gw927/) - GageWoven design GW927 Akiko II
- [Ceilings Patterns, Textures and Colors](https://www.gagecorp.net/ceilings/ceilings-patterns-textures-colors/) - Gage combines proprietary mechanical finishes, printing, coating and forming techniques to provide a unique and literally unlimited pallet of patterns, textures and colors. Any solid color (opaque or transparent) may be specified as Gage works with most color systems to match customer specifications. Standard mirror finishes (not shown) are silver (#327A), brass/gold (#327) and copper (#367).
- [System "A" – Adhesive Installation](https://www.gagecorp.net/cast-technical/adhesive-installation/) - Provide a smooth, straight, solid and clean substrate. Correct any defects prior to commencement of installation. Refer to the working drawings (approved shop drawings if required) for correct panel/sheet location and layout. Verify treatment for all termination edges, inside and outside corners (if any), and required cutouts (if any). Make all required cutouts prior to
- [Maritime Certifications](https://www.gagecorp.net/ceilings/gage-ceilings-technical-data/maritime-certifications/) - Gage Ceilings are certified for marine application by the IMO (International Maritime Organization) and the USCG (United States Coast Guard). Certifications are available by request from the factory.
- [Ceilings Acoustical Options](https://www.gagecorp.net/ceilings/gage-ceilings-technical-data/ceilings-acoustical-options/) - Options for decorative metal acoustical ceiling tiles panels
- [Concealed Snap-in Ceilings](https://www.gagecorp.net/ceilings/gage-ceilings-technical-data/concealed-snap-in-ceilings/) - Gage Ceiling System D1/M1 The Gage snap-in metal ceiling is a uniquely engineered system consisting of both 24 in. x 24 in. (D1) and 600 mm x 600 mm (M1) die-formed aluminum modules for either U.S. or Metric measure application. Gage distinctive chamfer-edge snap-in tiles, available in either flat or coffer profile, combine innovative design
- [Gage on the Web](https://www.gagecorp.net/home/about-us/gage-on-the-web/) - Elevator Interior Design article on an installation for Konica Minolta using GageCarve.
- [Custom Ceiling Designs](https://www.gagecorp.net/ceilings/custom-ceilings/) - Creative collaboration with Gage is a simple process. Provide a concept or sketch of your design indicating color(s) and finishes if possible and Gage will then provide CAD drawings along with a budgetary quotation. If budget and quantities are supportive, Gage will develop a prototype for client review and pre-production approval. The custom designs shown
- [Ceilings Honest Aluminum Designs](https://www.gagecorp.net/ceilings/ceilings-honest-aluminum-designs/) - Honest Aluminum™ designs provide the best use of the aluminum substrate. Through the selective application of mechanical and machined finishes, transparent tints and coating processes, all the inherent luminosity of the aluminum is integrated into each design. Most designs are pictured in aluminum but are also available in bronze, brass, copper and/or custom tints.
- [Ceilings Replicative Designs](https://www.gagecorp.net/ceilings/ceilings-replicative-designs/) - Gage utilizes a rare combination of state-of- the-art technology and illustrative master processes to create an extensive collection of realistic natural materials on aluminum.
- [Storage](https://www.gagecorp.net/gagemetal/gagemetal-technical-data/storage/) - Decorated sheet metal and metal laminates should never be stored in high moisture areas, even when still crated. Special care in storage should be given in hot and humid marine and tropical environments. Storage temperature should not exceed 85º F (30º C) or go below 50º F (10º C) for long periods of time. Optimal
- [Profile Systems D1 & M1](https://www.gagecorp.net/ceilings/gage-ceilings-technical-data/profile-systems-d1-m1/) - Item: GAGE concealed snap-in ceiling panel. Profiles: D1.1 or M1.1 (flat) D1.2 or M1.2 (coffered) Design: As specified. Perforations: Optional* Finish: Gloss levels from matte (30%) to gloss (100%) ±5%. Sizes: (D1) 24 in. x 24 in. (M1) 600 mm x 600 mm. Metal: (D1) .030 in. aluminum. (M1) .762 mm aluminum. (50% recycled). Carrier:
- [Lay-in Ceilings](https://www.gagecorp.net/ceilings/gage-ceilings-technical-data/lay-in-ceilings/) - GAGE D3 Lay-in Ceilings are available in five (5) different system profiles. D3 (24 inch x 24 inch nominal) die-formed aluminum ceiling tiles are very simple to install and accommodate a conventional (15/16 inch) T-bar suspension grid (consult factory for use with a 9/16 inch grid). D3 tiles are available in flat and tegular profiles.