SISTEMAMEN Technical Description

The SISTEMAMEN loose lay tile is made of stainless steel or iron (Black Organic finish). The total system is only 0.27″ (7 mm) thick and weighs 22 pounds (10 kg) for each tile including rubber underlayment. Tiles are 23.6″ x 23.6″ (60 cm x 60 cm) and the reveals are 0.27″ wide (7 mm). The tiles are aligned over the rubber underlayment and screwed into the integrated blocking plate at the four corners of each tile using stainless steel security screws. Installation is relatively simple. If the system is installed over a cement floor, then any change in dimension must be leveled using self leveling cement. Cracks or residual humidity will not affect the laying of the tiles. The system can also be laid dry on most existing floors, including ceramic tiles.

Metallic tile: 23.6 x 23.6 inches (60 cm x 60 cm)
Total thickness: 0.27 inches (0.7 cm)
Reveal: 0.27 inches (0.7 cm)
Weight: 22 lbs. (10 Kg) for each tile and rubber underlayment

ASTM C1028 (non slip)
Armor: 0.72 (dry)
Black Organic: 0.92 (dry)
Fire Test Rating / decree 26/6/84 – Class 1

NOTE: Complete test reports available upon request from the factory.

1. Main rubber underlayment
2. Corner rubber underlayment
3. Lateral rubber underlayment
4. Base board